Find answers, ask questions, and connect with our
community around the world.

Source-Connect Certification Courses Forums Source-Connect Adding Zoom to a Multiple Party connection on SC pro

  • Adding Zoom to a Multiple Party connection on SC pro

     konfront updated 8 months, 1 week ago 0 Member · 8 Posts
  • konfront

    Member
    September 19, 2020 at 9:41 am

    Adding Zoom to a Multiple Party connection on SC pro

  • konfront

    Member
    September 19, 2020 at 9:41 am

    Hi!

    So I'm almost done with my setup where i have multiple SC standard connection to my SC pro. How do i port a zoom meeting into the session so that that meeting can monitor the recordings?

  • Baylon

    Member
    September 19, 2020 at 9:47 am

    You will want to use Source-Nexus Pro on an Aux track to send audio to Zoom and receive audio back for you to be able to monitor.
    Create a mono aux track -> Insert Source-Nexus Pro.
    In your IO setup -> Create a mono bus -> To Zoom and From Zoom (if needed)
    Set the input of your aux track -> To Zoom

    In the Source-Nexus plugin set
    Send -> Input 1
    Receive -> Output

    In Zoom set
    Input (Microphone) – Source Nexus A
    Output (Microphone) – Source Nexus B

  • konfront

    Member
    September 19, 2020 at 9:55 am

    Thanks Baylon. will test this.

  • Baylon

    Member
    September 19, 2020 at 9:57 am

    I forgot to mention – for the user on zoom to be able to hear any audio have to also add a SEND to per audio track . remember to raise the send fader level up

  • konfront

    Member
    September 19, 2020 at 9:58 am

    Yes. Thanks again

  • konfront

    Member
    September 19, 2020 at 10:17 am

    I did just as you described but no audio is coming into zoom with the send all the way up. i have a screen shot but i dont think we can upload here

  • Baylon

    Member
    September 19, 2020 at 10:59 am

    Your mail is on our support systems and we just spoke so taking our conversation off the forum.

Viewing 1 - 8 of 8 replies

Original Post
0 of 0 posts June 2018
Now