Find answers, ask questions, and connect with our
community around the world.

Source-Connect Certification Courses Forums Networks and configuration Send audio from a plugin in Logic Pro to specific audio device with Source Nexus

  • Send audio from a plugin in Logic Pro to specific audio device with Source Nexus

     Michelle updated 2 months ago 2 Members · 5 Posts
  • Michelle

    Member
    September 29, 2021 at 12:07 am

    Hallo, the title says everything already. I have the Source Nexus Pro plugin and I can insert it on a channel in Logic Pro X. I can also set Nexus Pro to send the audio to a specific audio device of my choice as they all appear in the plugin.

    But unfortunately it does not work. When I try to set the send port to a channel, the device does not receive any audio.

    So could anyone please explain how to make this work?

    Best wishes,

  • Robert

    Administrator
    September 29, 2021 at 2:17 am

    Hi, what exactly are you trying to route and where?

    The top part of the Nexus plugin show possible output destination the audio can be sent to. This includes the hardware output of any hardware audio devices connected to the computer.

    So for example, if you see the meter bouncing in the top section of Source-Nexus (because it is getting the input of the track it is on) then if you set the Send of the Nexus plugin to the “built-in speakers” or “headphone output” of the computer you should hear whatever is appearing on the top meter of Source-Nexus out those speakers/headphones.

    Please confirm you see the meter bounding at the top of the Nexus plugin and also confirm exactly what output you are selecting in the Send section of the Nexus plugin.

  • Michelle

    Member
    September 29, 2021 at 4:26 am

    Thank you for the answer!

    I try to do exactly what you describe. Send the audio to speakers or headphones etc.

    I see the meter bouncing.

    But I cannot hear any sound on the respective outputs e.g. on the hardware.

  • Michelle

    Member
    September 29, 2021 at 4:27 am

    For example I select the built-in output.

    (My normal audio output from Logic Pro X would be my RME ADI-2 Pro).

  • Michelle

    Member
    September 30, 2021 at 3:32 pm

    Could anybody please help me?

    Where can I reach the customer support?

Viewing 1 - 5 of 5 replies

Original Post
0 of 0 posts June 2018
Now